In this video we will walk you through how to replace the chain on a clutch shade without removing the shade from the brackets.
In this video, we will walk you through the steps to replace a chain without removing the shade on a manual-operated roller shade. Follow along to ensure a smooth, damage-free process. Start by rolling the shade up to its upper limit. Remove the chain tension device from the mounting surface. If the shade has fascia, remove the front cover. The new chain will arrive at the correct loop length, with a crimped connector and chain tension device already installed. Insert the chain up through the clutch by aligning one bead with the clutch teeth and rotating the mechanism. Pull the chain through until the crimped connector is positioned on the back side toward the top of the clutch. This ensures the shade can have full range of operation. To install the chain tension device, compress the internal spring and slide the device to the bottom of the chain loop. Pull it down until it is fully compressed, then secure it to the mounting surface using the provided fasteners. If applicable, reinstall the fascia front cover. Finally, set the shade limits using the provided bead stops. And that’s it. Thanks for watching. For more information and videos, visit insolroll.com.